60 × 60 rectified porcelain from £13.99/m²60 × 120 from £14.99/m²Bathroom packages from £1,000See offers →

Guide

Why tiling goes wrong, and how to stop it

Almost every tiling failure traces back to one of six causes, and all six are avoidable at the buying stage. If you are reading this because it has already happened, the cause is probably below. If you are reading it before you start, good.

Six causes, all preventable before the first tile goes down

Latest offers & newest designs

New stock lands most weeks and offers change — both go straight onto our Facebook and Instagram. Follow along, or ring the showroom for a price on your quantities.

The six causes

In rough order of how often we see them.

Movementthe floor or wall flexes and the rigid tile on top cannot; the usual cause of cracked grout and lifting tiles on timber floors
Poor adhesive coverageadhesive combed on and the tile pressed into it leaves voids; the tile sounds hollow and cracks where it is unsupported
Wrong adhesivea rigid adhesive on a floor that moves, or a standard one under large format; S1 flexible is the floor for anything that matters
No preparationtiling onto a dusty, uneven or unprimed surface; the bond fails from day one and shows up in a year
No tankingwater gets behind the tiles in a shower, the adhesive softens and the wall behind rots; the ceiling below finds out first
No expansion jointsa big tiled floor with nowhere to move pushes against the walls and lifts in the middle

If you are mid-job and something has gone wrong, bring a photo in or send it on WhatsApp. We see every one of these every week and can usually tell you the cause from the picture.

Questions people ask

Straight answers

Why is my grout cracking?
Movement, nearly always. The floor or wall flexes a fraction and the grout, which is rigid, cracks along the joint. On a timber floor it means no decoupling membrane or tile backer under the tiles. On a new build it can be the house drying out for its first year. Occasionally it is grout mixed too wet or walked on too soon. The fix for the cause is a flexible adhesive and a decoupling layer; the fix for the symptom is raking out and regrouting, which only holds if the movement has stopped.
Why do my tiles sound hollow when I tap them?
Voids under the tile. Adhesive was combed onto the floor and the tile laid on top without the back being buttered, so the ridges did not collapse into full contact. A hollow tile is a tile waiting to crack the first time something heavy is dropped on it. On large format the standard is to butter the back as well as comb the floor, for 95% coverage. If it is already down and hollow but not cracked, leave it; if it cracks, that tile comes up and goes back on properly.
Why are my tiles lifting?
Either the surface under them moved, or the bond never took. Timber floors need a decoupling membrane or a backer board so the tile is isolated from the floor's movement. Smooth, dusty or painted surfaces need priming or the adhesive never grips. Tiles laid over old tiles without a primer lift the same way. A rigid adhesive on a floor with underfloor heating will also let go as the floor expands and contracts; it needs S1 or S2 flexible.
What is lippage?
The step between the edges of two neighbouring tiles, where one sits proud of the next. You catch your toe on it and the light shows it across the whole floor. It comes from an uneven adhesive bed or an uneven floor underneath, and it is worst on large format because a long edge shows the smallest difference. The fix at the buying stage is a levelling clip system, which holds every edge flush while the adhesive cures; the fix afterwards is taking the proud tile up.
What is the white bloom on new tiles or grout?
Efflorescence: salts carried to the surface by water as the adhesive, grout or screed dries. It looks like a white powder or haze, usually on a new floor in its first weeks. It is harmless and wipes or brushes off; a mild acidic tile cleaner shifts the stubborn patches. If it keeps coming back, water is still getting in somewhere, which is a different problem.
Why does my bathroom silicone go black?
Mould, growing in silicone that stays damp. It happens faster with the wrong silicone — general-purpose rather than anti-mould sanitary grade — and faster still where the joint traps water: a bath that moves when filled, or a tray edge that was not sealed before the tiles. The fix is to cut it all out, dry the joint fully, and refit with an anti-mould sanitary silicone. Expect to redo a shower's silicone every few years regardless; it is a wearing part.
Why has my grout gone dark or patchy?
Cement grout is slightly porous and takes on dirt and water unless it is sealed. A floor grout in a kitchen or hallway darkens along the traffic lines within months if it was never sealed. Seal it once it has cured and reseal every couple of years, or use an epoxy grout, which is sealed by nature and costs more. In a shower, dark patches that will not clean are mould in the grout, which means water is sitting behind it.
One tile has cracked. Do I have to redo the floor?
No. A single cracked tile with the rest sound is a point load on a hollow — something dropped, or a heavy item on a spot with no adhesive under it. Rake out the grout around it, break out the tile, clean back to the floor, and fit one new tile on a full bed. This is the reason to keep a spare box from the original batch, because the next batch will be a shade different.

Not sure how much you need?

Use the calculator, or bring your measurements in and we'll work out metreage including wastage plus the adhesive, grout and trims to go with it.